Mail

info@lalchandtechno.com
lalchandtechno@gmail.com

Call

+919824176019
+919824140103

TECHNICAL DETAILS

Fabrication Capability :

Largest Single Piece : 50 Tones.

Largest Diameter : 		06 Mtrs.

Largest Length : 		50 Mtrs

Highest Thickness : 		50 mm.

Lowest Thickness : 		03 mm

Hydrostatic Test : 		100 Kg/Cm2g

Pneumatic Test : 		10 Kg/Cm2g

Normally Materials in Stock & Handled by us:-

Plates: IS2062,IS2002,SA515/516 Gr.60/70, SA240TP304/304L/316/316L/310/.
316Ti Nickel and Nickel base Alloy, Copper,Aluminum & Hastelloy
Pipes:- IS1239,BS3059,SA53GrB& SA106 Gr B, SA312 TP 304/304L/316/316,
310,Copper & Aluminum.
Tubes: SA179,SA192, SA213 TP 304/304L/316/316L/310/ Copper, Cuppro Nickel etc.
   
   

Standards & Codes Followed by us:

Indian Standards, ASME, DIN, Brtisih,TEMA, API & ASTM etc. Fabrication Work Handle Under Third Party Inspection

Fabrication Facilities

As per Appendix ‘B’ attached

Testing & Measuring Facilites:-

( a ) Hydrostatic Test up to - 100 Kg/cm2g,
( b ) Pneumatics Test up to - 10 Kg/cm2g
( c ) Dye Penetrate Check,
( d ) Moli Testing,
( e ) Ultrasonic Thickness Checking,
( f ) Radiographic Examination,
( g ) Chemical and Physical analysis,
( h ) Sand Blasting,

Test from (f) to (h) are Subcontracted.

ALL KINDS OF POST AND PRE-WELD HEAT TREATMENT (STRESS RELIEVING, NORMALISING, ANNEALING ETC.) –

Subcontracte

Surface Treatment such as:-



Quality Control

- As per Appendix ‘C’ attached

General


List of major Client

- As per Appendix ‘D’ attached


List of Major Consultants & TPI

- M/s. Shroff & Associates (Engineers) Pvt. Ltd.
- M/s. Industrial Inspection Bureau
- M/s. Joshi & Associates - M/s. BHAVI ENGINEERS & CONSULTANTS
- M/s. Chempro Expertise Pvt. Ltd. - M/s. Chempro Inspections Pvt. Ltd.
- M/s. BUREAU VERITAS (I) PVT. LTD. - M/s. TUV INDIA PVT. LTD.
- M/s. B. Mehtalia Consultants Pvt. Ltd. - M/s. UDAI Consultancy Services
- M/s. ‘V’ Design - M/s. SIGNATE ENGINEERS. PVT. LTD.
- M/s. BAXCOUNSEL INSPECTION BUREAU PVT.LTD - M/s. MOTT MACDONALD.
- M/s. KNEXIR CONSULTANT P. LTD. - M/s. AMEYA ENGINEERS
- M/s. IPS MEHTALIA P. LTD  
   

Appendix ‘A’

Range of product

1) SS / MS Reactor with limpet coil / Internal Coils / Jackets
2) SS / MS HYDROGENATER (AUTOCLAVE)
3) Distillation / Stripper Columns
4) Evapourators.
5) Chimney / Stack
6) Heat Exchangers , Condenser
7) SS / MS Pressure vessels
8) M.S / Rubber Lined vessels
9) Storage Tanks MS / SS / AL

LIST O F PLANT & MACHINERY

DESCRIPTION OF MACHINE MAKE                      CAPACITY                           QUANTITY
A. MATERIAL HANDLING
1 OVER HEAD CRANE(E.O.T) MMTE 1.1: 25 TON 2 NO.
      45’ SPAN X 37’ HT.X 120’ LONG  
      40TON 1 NO.
      45’ SPAN X 35’ HT. X 155’ LONG  
      1.2: 5 TON 2 NO.
      30’ SPAN X 25’ HT. X 120’ LONG  
2 CHAIN PULLEY BLOCK SPEED 2.1: 10 TONS 2 NO.
    KITO 2.2: 20 TONS 1 NO.
    MMTE 2.3: 10 TONS ELECTRIC HOIST 3 NO.
    MMTE 2.4: 25 TONS ELECTRIC HOIST 3 NO.
    INDEF 2.5: 05 TONS 2 NO.
    DEMAGE 2.6: 05 TONS ELECTRIC HOIST 1 NO.
    SPEED 2.7: 02 TONS 2 NO.
    SPEED 2.8: 03 TONS 1 NO.
B. FABRICATION
1 HYDRAULIC PRESS SELF DESIGNED 1.1: 400 TONS SPAN 4Mt. 2 Nos.
      1.2: 200 TONS SPAN 3.5 Mt. 3 Nos.
2 PLATE BENDING MACHINE SELF DESIGNED 1.1: 2.1:3000 M.M. WIDTH SUITABLE FOR BENDING 50MM / 35MM THK. 3 Nos.
    SELF DESIGND 2.2: 2000 M.M. WIDTH SUITABLE FOR BENDING 20 MM THK. 1 NO.
    SELF DESIGNED 2.3: 1250 M.M. WIDTH SUITABLE FOR BENDING 6 MM THK 1 NO.
3 PIPE BENDING MACHINE SELF DESIGNED 3.1: BENDING CAP. OF PIPE UPTO Ф 1/2 “ TO Ф4” NB. SCH. 40 1 NO.
4 HAND GAS CUTTING SET ESAB ------ 4 SET
5 PUG CUTTING MACHINE ESAB ------ 2 Nos
6 PLASMA CUTTING MACHINE MEMCO 6.1:S.S. CUTTING CAP UPTO 50 M.M. THK. 1 Nos
  AIR PLASMA CUTTING TECHNO CRATS 6.2: S.S CUTTING CAP UPTO 25MM THK & 75MM THK 3 Nos
7 PLASMA CUTTING TORCH MEMCO 7.1: Mt. LONG 3 Nos
8 PLASMA ARC PUG CUTTING MACHINE MEMCO ---- 1 Nos
9 DISHED END EDGE PREPARATION MACHINE SELF DESIGND 9.1: DISHED END DIA Ф4000 Mt X 40 M.M. THK. 1 Nos
10 ELECTRONIC TORQUE CONTROLLED TUBE EXPANDERS WITH ACCESSORIES POWER MASTER 10.1 :Ф 3/8 O.D. TO Ф1½ Tube O.D. 1 No
11 WATER PUMP FOR DRAIN WATER FROM LARGE TANKS CROMPTON 11.1: 10000 LTRS/HR 1 No
12 HAND SHERING MACHINE KMP 12.1: CUTTING UPTO 4 M.M. THK. 3 Nos
13 HYDRAULIC TEST PUMP(MANUAL) RAJ LAXMI 13.1 WHEEL SIZE Ф200 MM X 25 MM 3 No
14 BENCH GRINDER SELF DESIGND 13.1 100 Kg/cm2g.Pressure Test 3 Nos
15 PORTABLE GRINDER WOLF 15.1 AG – 7 2 Nos
    BOSCH 15.2 AG - 7 TYPE GWS 0 24 180J 15 Nos
    SUHNER INDIA 15.3 FLEXIBLE SHAFT GRINDER 15 Nos
    BOSCH 15.4 : Ф5” WHEEL GRINDER 10 Nos
    WOLF 15.5 : GQ-4 SHINDER 1 Nos
16 PLATFORM TYPE DIGITAL WEIGHING MACHINE AXPERT 16.1 500 KG 1 No
17 SHEET MATEL WORK HAND BREAKE ---- 17.1 : BENDING UPTO 2750 M.M LONG X 3 MM THK. 1 No
18 AIR COMPRESSOR INGER SOLL 18.1 :: TYPE 30 MODEL 15 TE 2 No
19 TEMPLATE GAS PROFILE JHONSON 19.1 :TO 200mm THK, MAX. CIRCLE Ф1000, MAX. STRAIGHT CUT LENGTH 2000mm 1 No
C. WELDING
1 WELDING RECTIFIRE MEMCO 1.1: 600 AMPS 6 Nos.
2 WELDING RECTIFIRE WARRP 2.1: 600 AMPS 4 Nos.
3 ARGON ARC TIG WELDING WITH D.C. SUBPRESSURE FOR ALUMINIUM WELDING MEMCO 3.1: 400 AMPS 4 Nos.
4 ELECTROD DRYING OVEN MEMCO 4.1: CAP. 50KG. TEMP. 500 - 3500 C 2 Nos.
  PORTABLE OVEN MEMCO 4.2: CAP. 8KG. TEMP. 500 - 3500 C 2 Nos.
5 WELDING ROTATOR SELF DESIGND 5.1: 25T,15T, 10T, 5T, CAP. 20 SET
6 WELDING CABLE ----   20 SET
7 TIG WELDING TORCH MEMCO 7.1:400 AMPS, 10 M. LONG 600 AMPS ,8MT. LONG 4 Nos,2 Nos
8 PRE HEATING TORCH ESAB 8.1:HEAVY 2 Nos
9 MIG/MAG (CO2) ESAB 9.1:AUTO K 400 4 Nos
1 No
D. MACHINING & DRILLING
1 HEAVY DUTY LATHE ORNET 1.1: CENTRE HT. 400 MM & 1 No. BED LENGTH 10’ FT.. 1 Nos.
CHHANIYRA 1.2: CENTRE HT. 300 M.M. & BED LENGTH 6’ FT. 1 Nos.
ORNET 1.3: CENTER HT. 300M.M. & BED 22’FT. LONG 1 Nos.
ORNET 1.4: CENTER HT. 300M.M. & BED 12’FT. LONG 1 Nos.
SAHAJ. 1.5: CENTER HT. 1200M.M. & BED 8’FT. LONG 1 Nos.
NEW UNITED 1.6: CENTER HT. 800M.M. & BED 20’FT. LONG 1 Nos.
2 RADIAL DRILLING MACHINE PRABHAT 2.1: DRILLING CAP. Ф32 M.M. 1 Nos.
Univershal 2.2: AG-2 Drilling cap. Ф50 mm 1 Nos.
PILLER DRILLING MACHINE(MADE IN POLAND) HOFUM 2.3: DRILLING CAP. Ф40MM WITH TAPPING ATTECHMENT 1 Nos.
RADIAL DRILLING MACHINE(MADE IN GERMANY) WMW WEBO 2.4:: Ф65mm Drill X 1600 Arm Cap. 1 Nos.
3 HAND DRILL WOLF 3.1: DRILLING CAP. Ф12MM 1 Nos.
WOLF 3.2: DRILLING CAP. 32MM 1 Nos.
4 HYDRAULIC HAKSAW MACHINE MECH WELL 4.1: 450 M.M. CUTSIZE Ф250 M.M 2 Nos.
5 SHAPING MACHINE JUPITER 5.1: 600 M.M. STROKE 1 Nos.
6 BENCH GRINDER RAJ LAXMI 6.1:WHEELSIZE 250 MM 2 Nos.
7 Megnatic Drill Brouch All Cut 7.1::50mm Drill Cap. 1 Nos.
Cutter Type 7.2::32mm Drill Cap. 1 Nos.
8 KEY WAY ATTACHMENT ON LATH MACHINE FOR SHAFT KEY WAY LTE 8.1::50MM KEYWAY ON SHAFT 1 Nos.