LALCHAND TECHNO ENGINEERING

Manufacture of  :  SS/MS  Reactor with limpet / Internal Coils / Jackets, Pressures Vessels, Autoclaves, Storage Vessels, Heat Exchangers, Condensers, Columns, Chimany  &  Other Process Equipments for Chemical, Pharmaceutical, Dyes  &  Pesticides Plants.

 
 
               
Manufacturing Facility
 

Lalchand  Techno Engg. Factory located at GIDC , Vapi, Gujarat

       DESCRIPTION OF MACHINE                         MAKE                     CAPACITY                          QUANTITY

a.         MATERIAL HANDLING

 

1

OVER HEAD CRANE EVERSHIN 1.1:20 TONS 2 NO.
    45’ SPAN X 37’ HT.X 120’ LONG  
    1.2:5 TONS 2 NO.
    30’ SPAN X 25’ HT. X 120’ LONG  
       
       

B.              FABRICATION   

  1 HYDRAULIC PRESS SELF DESIGNED 1.1: 400 TONS SPAN 4Mt. 2 NO.
        1.2: 200 TONS SPAN 3.5Mt. 1 NO.
  2 PLATE BENDING MACHINE SELF DESIGNED 2.1:3000 M.M. WIDTH SUITABLE 1 NO.
        FOR BENDING 50 MM THK.  
        2.2: 2000 M.M. WIDTH SUITABLE 1 NO.
        FOR BENDING 20 MM THK.  
        2.3:1250 M.M. WIDTH SUITABLE
        FOR BENDING 6 MM THK. 1 NO.
           
  3 PIPE BENDING MACHINE SELF DESIGNED 3.1:BENDING  CAP.  OF PIPE UPTO
        f 1/2 “ TO  f 4” NB. SCH. 40  
         
4 HAND GAS CUTTING SET ESAB   4 SET
         
5 PUG CUTTING MACHINE ESAB   2 NO.
         
6 PLASMA CUTTING MACHINE MEMCO 6.1:S.S. CUTTING CAP UPTO 1 NO.
      50 M.M. THK.  
         
7 PLASMA CUTTING TORCH MEMCO 7.1:       10 Mt.  LONG 2 NO.
       
  8 PLASMA ARC PUG CUTTING MACHINE MEMCO    1 NO.
         
9 DISHED END EDGE SELF DESIGNED 9.1:DISHED END DIA f4000 Mt 1 NO.
  PREPARATION  MACHINE   40 M.M. THK.  
         
10 ELECTRONIC TORQUE  POWER MASTER 10.1: f 3/8 O.D. TO f 1  Tube O.D 1 NO.
  CONTROLLED TUBE EXPANDERS WITH  ACCESSORIES      
       
11 WATER PUMP FOR DRAIN WATER FROM LARGE TANKS CROMPTON 11.1: 10000 LTRS/HR 1 NO.
       
12 HAND SHERING MACHINE KMP 12.1: CUTTING UPTO 4 M.M. THK. 3 NO.
 

 

       
13 HYDRAULIC  TEST PUMP (MANUAL) SELF DESIGNED 13.1  70 Kg/cm2g.Pressure Test 2 NO.
         
14 BENCH GRINDER RAJ LAXMI 14.1: WHEEL SIZE f200 MM X 25 MM 3 NO.
         
15 PORTABLE GRINDER WOLF 15.1: AG – 7 2 NO.
    BOSCH 15.2: AG - 7 TYPE GWS 0 24 180J 5 NO.
    SUHNER INDIA 15.3 :FLEXIBLE SHAFT GRINDER 2 NO.
    HITACHI 15.4: f 4” WHEEL GRINDER 1 NO.
    WOLF 15.5: GQ-4 SHINDER 1No.
       
 

16

PLATFORM TYPE WEIGHING MACHINE AMBIKA 16.1 :1000 KG.  1 NO.
           
  17 SHEET MATEL WORK HAND BREAKE   17.1: BENDING UPTO 1No.
        2750 M.M LONG X 3 MM THK.  
           
  18 AIR COMPRESSOR INGER SOLL 18.1: TYPE 30 MODEL 15 TE 1 NO.
           

C           WELDING

           
  1 WELDING RECTIFIER  MEMCO 1.1:   400 AMPS WITH REMOTE 2 NO.
  2 WELDING TRANSFORMERS ASHOK 2.1:          400 AMPS 4 NO.
  3 ARGON ARC TIG WELDING MEMCO 3.1:          400 AMPS  
  4 WITH D.C. SUPPRESSOR FOR ALUMINUM  WELDING      
  5 ELECTRO  DRYING OVEN MEMCO 4.1:          CAP. 50KG. TEMP. 500 - 3500   C  2 NO.
  6 WELDING ROTATOR SELF DESIGNED 5.1:   25T,15T, 10T, 5T, CAP. 10 SET
  7 TIG WELDING TORCH MEMCO 7.1:          400 AMPS, 10 M. LONG. 4 NO.
  8 WELDING CABLE     LOTE
         

<TOP>

E              MACHINE  
  1 HEAVY DUTY LATHE KSEW 1.1:       CENTRE HT. 400 MM & BED LENGTH 2000 M.M 1 NO.
  CHHANIYRA 1.2:       CENTRE HT. 300 M.M. & BED LENGTH 1200 M.M. 1 NO.
  SABARMATI 1.3:CENTER HT. 300 M.M.& BED LENGTH 3500 M.M 1 NO.
 
  2 RADIAL DRILLING MACHINE PRABHAT 2.1:DRILLING CAP.  f32  M.M. 1 NO.
  UNIVERSHAL 2.2:AG-2 Drilling cap. f50 mm 1 NO.
 
  3 PILLAR DRILLING MACHINE HOFUM 2.3:DRILLING CAP. f40MM 1 NO.
  WITH TAPPING ATTECHMENT
 
  4 HAND DRILL WOLF 3.1:DRILLING CAP.  f12MM 1 NO.
  WOLF 3.2:DRILLING CAP. f 32MM 1 NO.
 
  5 HYDRAULIC HACKSAW MACHINE JASWANT 4.1:450 M.M. CUTSIZE f250 M.M. 1 NO.
 
  6 SHAPING  MACHINE JUPITER 5.1:600 M.M. STROKE 1 NO.
 
  7 BENCH GRINDER RAJ LAXMI 6.1:WHEELSIZEf250 MM 3 NO.
 
  8 MAGNETIC DRILL BROOCH All Cut 7:1: f50 mm Drill Cap. 1 NO.
 
  9 Cutter Type  7:2: f32mm Drill Cap. 1 NO.
 
  10 RADIAL DRILLING MACHINE WMW 8:1: f 65 mm X 1600 Drill Cap. 1 NO.
  MEUSER 8:2: f80mm X 1700 Drill Cap. 1 NO.
 
         

LIST  OF  Q.C.  INSTRUMENTS : 

1 spirit Lever - (Aluminum) 600 mM
2 Spirit Lever - (Aluminum) 300 mm
3 Spirit Lever  - (Plastic) 200 mM
4 Spirit Lever - (Plastic) 300 mM
5 Mitu Toyo Make vernieR caliper 8”
6 Mitu Toyo Make vernieR caliper 12”
7 Mitu Toyo Make vernieR caliper 24”
8 MITU TOYO MAKE DAIL INDICATOR WITH MAGNETIC STAND  
9 MITU TOYO MAKE DEGREE PROTECTOR SET  
10 ADJUSTABLE OUTSIDE MICRO METER 0-150 MM
11 OUTSIDE MICRO METER 0.25,0.50, 25-75 MM
12 Radius Gauge  
13

Screw Pitch Gauge

 
14 Feeler Gauge  
15 CRYSTAL S.S. SCALE   300 M.M. TO 1000 M.M. LONG  
16  STRAIGHT EDGE   300 M.M. TO 2000 M.M.  LONG  
17 Inside Spring Caliper 12”
18 Outside Spring Caliper 12”
19 DIVIDER    6” LONG TO 10 FT. LONG  
20 MECO DIGITAL TONG TESTER  
21 CRYSTAL DEGREE PROTECTOR  
22 Mini Moly Detector  
23 90 Degree Right Angle   6” to 24”  
24   ultrasonic thickness gauge 1MM TO 200MMTHK MEASURE CAP.
25 OUT SIDE MICRO METER 400 to 500 mm
26 in side micro meter 50  to 600 mm
27 outside micro meter  150 to 300 mm
     

Home  About us   Manufacturing Facility   Products Gallery   Contact us